Installing wall panels not only enhances the appearance of a room, but also plays an important role in the comfort and durability of the interior. There is one material that is widely used for this purpose, namely blockboard, which is known for its strength, stability, and relative ease of installation. In addition to its neat and modern appearance, the use of blockboard also helps minimize the risk of warping or cracking of wall panels in the long term.
So, to avoid difficulties or confusion, let’s understand the steps for installing panels using blockboard walls so that the results are neat, durable, and in accordance with good workmanship standards!
What is Wall Blockboard?
Blockboard is generally a processed wood board with a core composed of solid wood strips that are tightly glued together and covered with a thin veneer on both sides. This structure makes blockboard more stable across a wide area and less prone to warping than some other materials. Therefore, blockboard is often chosen as an interior panel, including wall panels that require a flat and neat surface.
What Are the Advantages of Blockboard?
Before moving on to the installation stage, you need to know why blockboard is suitable for walls. Let’s take a look at the following reasons!
- Stability over a wide area, making it suitable for large wall panels that are not prone to warping.
- Lighter weight than solid wood, making installation easier.
- Smooth surface, making it easy to apply paint, laminate, or veneer finishes.
- Relatively affordable compared to solid wood, yet still strong and durable.
Tools and Materials to Prepare
Before starting, prepare the following equipment:
- Blockboard for walls, adjust the thickness to the design requirements
- Ruler & pencil for measuring marks
- Wood saw / panel cutting machine
- Special wood glue or durable wood adhesive
- Screws for wood
- Electric drill & screwdriver
- Sandpaper & finishing tools (paint, veneer, HPL, etc.)
Make sure the blockboard you choose is of good quality so that the wall panel installation remains sturdy and neat.
Installation Steps
After preparing the necessary materials and tools, the next step is the installation process. You can follow these steps in sequence to ensure a strong, neat, and durable result.
1. Wall Surface Preparation
Make sure the wall surface is clean, flat, and dry. If it is still rough or uneven, use plaster or putty to level it.
2. Blockboard Measurement and Cutting
Measure the width and height of the wall area where the panels will be installed. Mark the blockboard surface, then cut it to size. Pay attention to the grain direction for a more natural visual appearance.
3. Installing Blockboard on the Wall
Apply wood glue evenly to the back of the blockboard, then press it onto the wall. Install screws at key points to strengthen the installation. Try to space the screws evenly so that the panels do not warp.
4. Finishing
Once all the wall blockboards are installed, continue with the finishing stage. You can choose paint, laminate, or wood veneer according to the desired interior style. Don’t forget to sand the surface first so that the paint or coating is neater.
Tips for Maximum Installation Results
- Always double-check the measurements before cutting the panels to avoid mistakes that could ruin the final appearance.
- Use spacers during installation to ensure consistent spacing between panels for a neater appearance.
- Choose a finishing type that matches the room’s concept, whether it’s a natural, modern, rustic, or other style, so that the wall panels blend in with the overall interior design.
Now you have a clearer picture of the process of installing wall panels using blockboard, from the preparation stage to the final finishing. Essentially, a neat and durable installation result is largely determined by precise measurements, clean cutting techniques, and the selection of truly high-quality materials.
So, if you are preparing an interior project and want maximum results without complications later on, make sure to choose blockboard that is strong, stable, and easy to work with. And, when it comes to materials, Hojaya is here to provide solutions you can rely on!
We offer a variety of high-quality blockboard options, from standard types to laminated ones with attractive patterns ready to enhance your room’s appearance. The quality is guaranteed, the selection is comprehensive, and it’s easy to customize to your project’s needs.
What are you waiting for? Let’s bring your interior project to life with a neater, more aesthetic, and long-lasting result using Hojaya’s trusted materials!